Mobile equipment Implements - end-of-line

Combine draper header

Q: What are the key features of the Combine Draper Header system?

Key features include PLC and computer-based control and data acquisition, a full HPU (47 GPM, 4,000 PSI), safety zone scanners, a vertical swing arm with hydraulic motor to drive the header, particle counting system, CAN bus validation and DTC monitoring, and a swing arm to raise and lower the PTO shaft and spline.

Q: What tests does the Combine Draper Header system perform?

Tests include header ID verification, reel lift/lower, reel motor speed via pressure control valve, lights testing, reel fore/aft, tilt extend/retract, knife motor speed, platform raise/lower, belt speed sensor control, belt stall and error code reporting, sensor calibrations, system slushing, and system phasing.

Titan Combine Draper Header system for mobile equipment implements - end-of-line applications. This test system runs functional tests on fully assembled combine draper header systems. This system was designed to automate functional testing, break-in, and assembly validation of header systems prior to installation into the completed combine.

PLC and computer based control and data acquisition system Full HPU to generate hydraulic power to the unit under test 47 GPM 4000 PSI HPU Safety zone scanners Vertical swing arm to raise and lower PTO shaft and spline Hydraulic motor on end of swing arm to drive the header Particle counting system CAN bus validation and DTC monitoring Lights. Belt speed sensor via controlling the actual belt speed PLC and computer based control and data acquisition system Full HPU to generate hydraulic power to the unit under test 47 GPM 4000 PSI HPU Safety zone scanners Vertical swing arm to raise and lower PTO shaft and spline Hydraulic motor on end of swing arm to drive the header Particle counting system CAN bus validation and DTC monitoring Lights. Belt speed sensor via controlling the actual belt speed

Header ID verification Reel lift/lower Reel motor via pressure control valve for variable speeds Lights testing Reel FORE/AFT Tilt extend/retract Knife motor speed Platform raise/lower Belt speed sensor via controlling actual belt speed Belt stall & associated error code reporting Sensor calibrations System slushing System phasing Header ID verification Reel lift/lower Reel motor via pressure control valve for variable speeds Lights testing Reel FORE/AFT Tilt extend/retract Knife motor speed Platform raise/lower Belt speed sensor via controlling actual belt speed Belt stall & associated error code reporting Sensor calibrations System slushing System phasing

Selected Capabilities

PLC and computer based control and data acquisition system

Full HPU to generate hydraulic power to the unit under test

47 GPM 4000 PSI HPU

Request a quote

Overview Features Specs Gallery FAQ Catalog

Przegląd

This test system runs functional tests on fully assembled combine draper header systems. It was designed to automate functional testing, break-in, and assembly validation of header systems prior to installation into the completed combine.

Kluczowe cechy

PLC and computer based control and data acquisition system

Full HPU to generate hydraulic power to the unit under test

47 GPM 4000 PSI HPU

Safety zone scanners

Vertical swing arm to raise and lower PTO shaft and spline

Hydraulic motor on end of swing arm to drive the header

Particle counting system

CAN bus validation and DTC monitoring

Lights.

Belt speed sensor via controlling the actual belt speed

Tests & Measurements

Header ID verification

Reel lift/lower

Reel motor via pressure control valve for variable speeds

Lights testing

Reel FORE/AFT

Tilt extend/retract

Knife motor speed

Platform raise/lower

Belt speed sensor via controlling actual belt speed

Belt stall & associated error code reporting

Sensor calibrations

System slushing

System phasing

Technical Specifications

HPU

47 GPM 4000 PSI

Gallery

Frequently Asked Questions

What is the Combine Draper Header test system?

The Ascential T&M Combine Draper Header system is designed for mobile equipment implements end-of-line applications. It runs functional tests on fully assembled combine draper header systems, automating functional testing, break-in, and assembly validation of header systems prior to installation into the completed combine.

What are the key features of the Combine Draper Header system?

What tests does the Combine Draper Header system perform?

Ready to upgrade your infrastructure?

Contact our engineering team for a custom quote or technical consultation regarding Combine draper header.

Speak with an expert Browse catalog

Combine draper header

Przegląd

Kluczowe cechy

Tests & Measurements

Technical Specifications

HPU

Gallery

Frequently Asked Questions

Ready to upgrade your infrastructure?

Related Products

Hay baler – round & square

Combine belt

Hay mower

Tractor auxiliary power generator

Asystent czatu